PARTS FOR VERMEER TRENCHERS USING 1.654" (2250) CHAIN
ROLLER & BEARINGS
263299001 7" ROLLER ASSEMBLY $275.30
369030 IDLER BOLT FOR ROLLER $6.60
263299001SBK ROLLER REPAIR KIT $82.00
(BEARINGS, SEALS, SPACERS & WASHERS)
CARBIDE CUTTERS
BULLET BIT TYPE $18.95
CSM1654C BULLET BIT HOLDER CENTER
CSM1654R BULLET BIT HOLDER R/H
CSM1654L BULLET BIT HOLDER L/H
CC-1 CARBIDE BULLET BIT $6.95
CARBIDE CUTTERS
SHARK TOOTH TYPE
$18.95
SSM1654C SHARK SIDEMOUNT CENTER
SSM1654R SHARK SIDEMOUNT R/H
SSM1654L SHARK SIDEMOUNT L/H
CHAIN REPAIR PARTS
CHRL1650 REPAIR LINK (INC 2 PINS) $20.75 CHRL1640 REPAIR LINK (INC 2 PINS)
FOR THE 2 PITCH CHAIN FOR THE 4 PITCH CHAIN $20.67
137003 ROLLER LINK 137001 CHAIN PIN (WITH KEY) CONNECTOR $10.50 $3.50 $15.50 137002H
BARE CHAIN & DIGGING CHAIN ASSEMBLIES
DRIVE SPROCKETS
220359001 SOLID 10 TOOTH $123.20
1.5" BORE & AUGER LOCK
(1150, 1350)
205366003 SOLID 10 TOOTH $120.00
1.75" BORE (LM35, LM40, LM42, V1550, V1650)
263306001 SPLIT 10 TOOTH (V2050) $115.00
(V2050)
CUP CUTTERS
NEW STYLE FOR H/D CHAINS WITH WIDE HOLE PATTERNS
(3/8" bolts slotted 1.125 through 1.8125" c/c)
136024 CUP TOOTH L/H $5.86
136025 CUP TOOTH R/H $5.86
OLD STYLE FOR LITE DUTY CHAINS
3/8" Bolts with 1"center to center hole pattern)
6655749 CUP TOOTH R/H $6.48
6655750 CUP TOOTH L/H $6.48
If you have questions
call 1-800-4471941 or email
The welded Shark Tooth Chain is a maintenance free low profile chain assembly. The carbide tipped shark tooth will outlast the chain. Tension Adjustment is the only maintenance required. A great chain for digging HARD ROCK, CALICHE, CORAL, AND LIMESTONE.
Lowest Cost trencher chain. Use in the easiest of digging conditions such as SAND, SANDY LOAM, LOOSE SOIL, AND STICKY CLAY.
Low-cost trencher chain. Best for trenching SAND, SANDY LOAM, LOOSE SHALE, LOOSE SOIL, CALICHE, AND CLAY.
This 50/50 chain configuration allows for trenching in almost any type of ground. The carbide tipped replaceable bullet bits are bolted to the chain and used to break up the ground. The cup teeth follow to clean the trench. Use on LOOSE DIRT, MEDIUM AND HARD ROCKY SOIL.
This 50/50 chain configuration allows for trenching in almost any type of ground. The non-replaceable Shark Tooth will outlast the chain. The cup teeth follow the Shark Tooth to clean the trench. Use on LOOSE DIRT, MEDIUM ADN HARD ROCKY SOIL.
The bolt-on rock and frost chain are used on HARD ROCKY CONDITIONS AND FROZEN GROUND. This chain uses replaceable carbide tipped bullet bits to pick and fracture hard rock and frozen ground.
CALL
800-447-1941
TO OBTAIN CURRENT PRICING ON DIGGING CHAIN
CALL
800-447-1941
TO OBTAIN CURRENT PRICING ON DIGGING CHAIN
VERMEERR
Using (2250) 1.654" Pitch Chain
Models # LM35, LM25, LM40, LM42, V1150, V1250, V1350, V1550, V1650, V1850, V2050, V120X, RT60, RT100, RT150, RT200, RT250, RTX100, RTX200, FLEXTRAK 75,
TRENCHER DIGGING PARTS FOR
REPLACEMENT DIGGING PARTS LLC
4 PITCH SPACING 1.654" PITCH CUP TOOTH CHAIN 4" CUT
1.654" PITCH CUT TOOTH CHIAN 4" CUP
*BOLTED CHAINS ALLOW FOR A WIDER TRENCH
1.654" PITCH 50/50 COMBO CHAIN 4" CUT
(CARBIDE TIPPED BULLET BITS & CUP TOOTH)
THIS IS OUR BEST - SELLING CHIAN
1.654" PITCH 50/50 COMBO CHAIN 4" CUT
(CARBIDE TIPPED SHARK TEETH & CUP TOOTH)
1.654 PITCH SHARK TOOTH WELDED CHAIN 4" CUT
1.654" PITCH ALL ROCK & FROST CHAIN 4" CUT
(CARBIDE TIPPED BULLET BITS)
FREIGHT ONLY $35.00
UP TO 60LBS.
ONLINE ONLY