Cup Teeth
Bullet Bit Holders
Carbide Bullet Bits
Repair Parts For Carbide Cutters
Chain Repair Parts
2.00″ PITCH BARE DIGGING CHAIN & DIGGING CHAIN ASSEMBLY
(Pitch is the center-to-center measurement of the chain pins)
(Number of links on a chain is the number of chain pins divided by 2)
STANDARD CHAIN 2″ CUP TOOTH CHAIN 6″ CUT
2.0″ pitch standard trencher chain has 50% cup teeth, with a tooth on every other station. This design helps clay fall off the chain, preventing it from clogging the boom. It works well in conditions such as sand, sandy loam, loose shale, loose soil, and sticky clay.
2″ PITCH DOUBLE STANDARD BARE CHAIN
2.0″ Anti-Back Flex bare trencher chain. Chain patterns are offered by calling 800-447-1941. All patterns for all applications.
2″ PITCH CUP DOUBLE STANDARD CUP TOOTH CHAIN 6″ CUT
The double standard trencher chain has100% cup teeth, with a tooth on every station. It works well in conditions such as sand, sandy loam, loose shale, loose soil, and clay.
2″ PITCH 50/50 COMBO CHAIN 6″ CUT
(CARBIDE TIPPED BULLET BITS & CUP TOOTH)
This 50/50 chain setup works well for trenching in nearly any type of ground. Carbide-tipped, replaceable bullet bits are bolted to the chain to fracture and break apart rock, while cup teeth follow to clean out the trench. It delivers the best production in loose dirt, as well as medium and hard rocky soil.
2″ PITCH 50/50 COMBO CHAIN 6″ CUT
(CARBIDE TIPPED SHARK TEETH & CUP TOOTH)
This 50/50 cup and shark tooth chain is built for trenching in nearly any type of ground. The durable, non-replaceable shark tooth lasts longer than the chain, while the cup teeth follow behind to clean out the trench. Perfect for loose dirt, as well as medium and hard rocky soil. The shark teeth are good for tree roots.
2″ SHARK TOOTH WELDED CHAIN 6″ CUT.
The welded shark tooth chain is a low-profile, maintenance-free welded assembly. Its carbide-tipped teeth are built to outlast the chain itself, with tension adjustment being the only upkeep needed. It’s perfect for digging through hard rock, caliche, coral, limestone, and even tough tree roots.
2″ PITCH ROCK & FROST CHAIN 6″ CUT
(CARBIDE TIPPED BULLET BITS)
This double standard chain is a Rock and Frost Chain designed for tough, solid, and rocky conditions. It’s also great for digging into frozen ground, with customers reporting success on solid rock and limestone. It features replaceable bullet bits that pick and fracture rock and hard ground.
2″ PITCH ALL BULLET H-PLATE CHAIN 6″ CUT
Need a chain built for the toughest digging conditions? This one’s perfect for tackling hard, rocky ground, frozen soil, asphalt, and concrete. Its welded H-plate design delivers the ideal bit penetration angle fracturing hard applications. The assembly features heavy-duty, heat-treated pockets and rock bits with pocket protectors, and since it’s welded, there are no bolts to break.