Digging Teeth
Carbide Cutter (Bullet Bit Type)
Repair Parts for Chains
2.00″ PITCH BARE DIGGING CHAIN & DIGGING CHAIN ASSEMBLY
(Pitch is the center-to-center measurement of the chain pins)
(Number of links on a chain is the number of chain pins divided by 2)
2″ PITCH STANDARD CUP TOOTH CHAIN
LOWEST PRICED STANDARD TRENCHER CHAIN is use in the easiest of digging conditions, such as:
SAND, SANDY LOAM, LOOSE SHALE, LOOSE SOIL AND STICKY CLAY.
SAND, SANDY LOAM, LOOSE SHALE, LOOSE SOIL AND STICKY CLAY.
2″ PITCH ALL CUP TOOTH CHAIN 6″ CUT
2″ PITCH ALL CUP TOOTH CHAIN 6″ CUT
LOW COST DOUBLE STANDARD CHAIN.
Best for trenching SAND, SANDY LOAM, LOOSE SOIL, LOOSE SHALE, CALICHE, AND CLAY.
2″ PITCH 50/50 COMBO BULLET BITS AND CUP TEETH 6′ CUT
This 50/50 chain configuration allows for trenching in almost any type of ground. The carbide tip replaceable bullet bits are bolted to the chain and used to break up the ground. The cup teeth follow to clean the trench. This 50/50 double standard chain will give the highest production in frozen ground, highly compacted soils and rock.
2″ PITCH 50/50 COMBO SHARK AND CUP TEETH 6″ CUT
This 50/50 double standard chain configuration allows for trenching in almost any type of ground. The non replaceable shark tooth will outlast the chain. The teeth follow the carbide tooth to clean the trench. This is a double standard chain used on frozen ground, highly compacted soils, and rock.
2″ SHARK TOOTH WELDED CHAIN 6″ CUT.
The welded shark tooth chain is a maintenance free low profile chain assembly. The carbide tipped shark tooth will outlast the chain. Tension adjustment is the only maintenance required. A great chain for digging hard rock, caliche, coral, and limestone.
2″ PITCH ALL ROCK & FROST CHAIN 6″ CUT
(CARBIDE TIPPED BULLET BITS)
The rock and frost chains are used on hard rocky conditions and frozen ground. This chain uses replaceable carbide tipped bullet bits to pick and fracture hard rock and frozen ground.
2″ PITCH ALL BULLET H-PLATE CHAIN 6″ CUT
Do you need a chain for digging in the toughest conditions? Use this chain in hard rocky conditions, frozen ground, asphalt, and concrete. The welded h-plate chain gives you the best bit penetration angle plus great trench clean out. This assembly has heavy-duty, heat-treated pockets and rock bits with pocket protectors.