Digging Teeth
Carbide Cutter (Bullet Bit Type)
Carbide Cutter (Shark Tooth Type)
Double Standard Chain
Standard Chain
1.654″ PITCH BARE DIGGING CHAIN & DIGGING CHAIN ASSEMBLIES
(Pitch is the center-to-center measurement of the chain pins)
(Number of links on a chain is the number of chain pins divided by 2)
STANDARD CHAIN – 1.654″ PITCH CUP TOOTH CHAIN 4″ CUT
1.654” pitch standard trencher chain has 50% cup teeth, with a tooth on every other station. This design helps clay fall off the chain, preventing it from clogging the boom. It works well in conditions such as sand, sandy loam, loose shale, loose soil, and sticky clay.
1.654″ DOUBLE STANDARD PITCH BARE CHAIN
1.654”bare trencher chain. Chain patterns are offered by calling 800-447-1941. All patterns for all applications.
1.654″ PITCH DOUBLE STANDARD CUP TOOTH CHAIN 4″ CUT
The double standard trencher chain has 100% cup teeth, with a tooth on every station. It works well in conditions such as sand, sandy loam, loose shale, loose soil, and clay. Great chain for shallow trenches.
1.654″ PITCH 50/50 COMBO CHAIN 4″ CUT
This 50/50 chain setup works well for trenching in nearly any type of ground. Carbide-tipped, replaceable bullet bits are bolted to the chain to fracture and break apart rock, while cup teeth follow to clean out the trench. It delivers the best production in loose dirt, as well as medium and hard rocky soil. Digging in frozen ground you will want to look at the shark tooth chain. It’s great in frozen and tree roots.
1.654″ PITCH 50/50 COMBO SHARK CHAIN 4″CUT
This 50/50 cup and shark tooth chain is built for trenching in nearly any type of ground. The durable, non-replaceable shark tooth lasts longer than the chain, while the cup teeth follow behind to clean out the trench. Perfect for loose dirt, as well as medium and hard rocky soil. This shark chain is good with three roots. The shark teeth pull instead of pick at the rock or hard application.
1.654″ PITCH WELDED LOW PROFILE SHARK CHAIN 4″ CUT
The welded shark tooth chain is a maintenance-free, low-profile welded chain assembly. Its carbide-tipped shark tooth is designed to outlast the chain itself, with tension adjustment being the only upkeep needed. It’s perfect for digging through hard rock, caliche, coral, limestone, and even tough tree roots.
1.654″ PITCH ALL BOLT-ON BULLET BIT CHAIN 4″ CUT
This is an aggressive bolted chain. The bolt-on rock and frost chain works well with solid rock, coral, limestone, caliche, and compacted applications, among others. it comes with a carbide bullet that spins to fracture hard materials, breaking apart solid surfaces. When trenching in less dirt, this chain is preferable since it has no cup teeth to clean the trench. It’s not recommended a deep solid application.