Cup Teeth
Bullet Bit Holders
Carbide Bullet Bits
Repair Parts For Carbide Cutters
Chain Repair Parts
2.00″ PITCH BARE DIGGING CHAIN & DIGGING CHAIN ASSEMBLY
(Pitch is the center-to-center measurement of the chain pins)
(Number of links on a chain is the number of chain pins divided by 2)
STANDARD CHAIN 2″ CUP TOOTH CHAIN 6″ CUT
STANDARD TRENCHER CHAIN.
1.654 pitch with 4 pitch spacing. Use in the easiest digging conditions such as sand, sandy loam, loose shale, loose soil, and sticky clay.
2″ PITCH DOUBLE STANDARD BARE CHAIN
2″ PITCH CUP DOUBLE STANDARD CUP TOOTH CHAIN 6″ CUT
LOW-COST DOUBLE STANDARD trencher chain.
Best for trenching sand, sandy loam, loose shale, loose soil, caliche, and clay.
2″ PITCH 50/50 COMBO CHAIN 6″ CUT
(CARBIDE TIPPED BULLET BITS & CUP TOOTH)
This 50/50 chain configuration allows for trenching in almost any type of ground. The carbide tipped replaceable bullet bits are bolted to the chain and used to fracture the rock and break it apart.
The cup teeth follow to clean the trench. Highest production on loose dirt, medium and hard rocky soil.
2″ PITCH 50/50 COMBO CHAIN 6″ CUT
(CARBIDE TIPPED SHARK TEETH & CUP TOOTH)
This 50/50 cup and shark tooth chain allows for trenching in almost any type of ground. The non-replaceable shark tooth will outlast the chain. The cup teeth follow the shark tooth to clean the trench. Use on loose dirt, medium and hard rocky soil.
2″ SHARK TOOTH WELDED CHAIN 6″ CUT.
The welded shark tooth chain is a maintenance free low profile chain assembly. The carbide tipped shark tooth will outlast the chain. Tension adjustment is the only maintenance required. A great chain for digging hard rock, caliche, coral, and limestone.
2″ PITCH ALL ROCK & FROST CHAIN 6″ CUT
(CARBIDE TIPPED BULLET BITS)
The rock and frost chains are used on hard rocky conditions and frozen ground. This chain uses replaceable carbide tipped bullet bits to pick and fracture hard rock and frozen ground.
2″ PITCH ALL BULLET H-PLATE CHAIN 6″ CUT
Do you need a chain for digging in the toughest conditions? Use this chain in hard rocky conditions, frozen ground, asphalt, and concrete. The welded h-plate chain gives you the best bit penetration angle plus great trench clean out. This assembly has heavy-duty, heat-treated pockets and rock bits with pocket protectors.