Cup Cutters
Bullet Bit Holders
Carbide Bullet Bits
Repair Parts For Carbide Cutters
Drive Sprockets
Auger Drive Sprocket
Rollers
Idler Sprockets
Chain Repair Parts
2.650″ PITCH BARE DIGGING CHAIN & DIGGING CHAIN ASSEMBLIES
(Pitch is the center-to-center measurement of the chain pins)
(Number of links on a chain is the number of chain pins divided by 2)
2.650″ PITCH BARE CHAIN
2.650″ PITCH CUP TOOTH CHAIN 6″ CUT
Low-cost trencher chain. Best for trenching sand, sandy loam, loose shale, loose soil, caliche and clay.
2.650″ PITCH 50/50 COMBO CHAIN 6″ CUT
(CARBIDE TIPPED BULLET BITS & CUP TOOTH)
This 50/50 chain configuration allows for trenching in almost any type of ground. The carbide tipped replaceable bullet bits are bolted to the chain and used to break up the ground. The cup teeth follow to clean the trench. Highest productivity is on loose dirt, medium and hard rocky soil.
2.650″ PITCH 50/50 COMBO CHAIN 6″ CUT
(CARBIDE SHARK TEETH & CUP TOOTH)
This 50/50 chain configuration allows for trenching in almost any type of ground. The non-replacable shark tooth will outlast the chain. The cup teeth follow the shark tooth to clean the trench. Highest productivity is on loose dirt, medium and hard rocky soil.
2.650″ PITCH SHARK TOOTH WELDED CHAIN 6″ CUT
The welded shark tooth chain is a maintenance free low-profile chain. The carbide shark tooth will outlast the chain, tension adjustment is the only maintenance required. Highest production on hard rock, caliche, coral and limestone.
2.650″ PITCH ALL ROCK & FROST CHAIN 6″ CUT
( CARBIDE TIPPED BULLET BITS )
The bolt on rock and frost chains are used on hard rocky conditions and frozen ground. This chain uses replaceable carbide tipped bullet bits to pick and fracture hard rock and frozen ground.
2.650″ PITCH ALL BULLET H-PLATE CHAIN 6″ CUT
Do you need a chain for trenching in extreme conditions? This chain has high production in hard rocky conditions, frozen ground, asphalt and concrete. The welded h-plate chain gives you the best angle for the bullets to fracture the ground. This assembly has heavy-duty heat-treated pockets and the bullets are flared for pocket protection.