Digging Teeth
End & Idler Sprocket
Carbide Cutters (Bullet Bit Type)
Carbide Cutters (Shark Style)
Double Standard Chain
Standard Chain
1.654″ PITCH BARE DIGGING CHAIN & DIGGING CHAIN ASSEMBLIES
(Pitch is the center-to-center measurement of the chain pins)
(Number of links on a chain is the number of chain pins divided by 2)
STANDARD CHAIN – 1.654″ PITCH CUP TOOTH CHAIN 4″ CUT
The standard trencher chain has 50% cup teeth, with a tooth on every other station. This design helps clay fall off the chain, preventing it from clogging the boom. It works well in conditions such as sand, sandy loam, loose shale, loose soil, and sticky clay.
1.654″ PITCH BARE DOUBLE STANDARD CHAIN
1.654″ Bare trencher chain. Chain patterns are offered by calling 800-447-1941. All patterns for all applications.
1.654″ PITCH CUP TOOTH CHAIN 4″ CUT
The double standard trencher chain has 100% cup teeth, with a tooth on every station. It works well in conditions such as sand, sandy loam, loose shale, loose soil, and clay.
1.654″ PITCH 50/50 COMBO CHAIN 4″ CUT
(CARBIDE TIPPED BULLET BIT & CUP TOOTH
This 50/50 chain setup makes it easy to trench through almost any type of ground. The replaceable carbide-tipped bullet bits are bolted to the chain to break solid hard dirt or rock, while the cup teeth follow to clean out the trench. This double standard 50/50 chain delivers top performance in frozen ground, highly compacted soils, and rock.
1.654″ PITCH 50/50 COMBO SHARK CHAIN 4″CUT
(CARBIDE FACED SHARK TOOTH & CUP TOOTH)
This 50/50 cup and shark tooth chain is built for trenching in nearly any type of ground. The durable, non-replaceable shark tooth lasts longer than the chain, while the cup teeth follow behind to clean out the trench. Perfect for loose dirt, as well as medium and hard rocky soil. Shark teeth are good for tree roots.
1.654″ PITCH WELDED LOW PROFILE SHARK CHAIN 4″ CUP
The welded shark tooth chain is a maintenance free low-profile chain. The carbide tipped shark tooth outlast the chain. Tension adjustment is the only maintenance required. High productivity on hard rock, caliche, coral, and limestone. Good for tree roots.
1.654″ PITCH ROCK AND FROST CHAIN 4″ CUT
This is an aggressive bolted chain. The bolt-on rock and frost chain works well with solid rock, coral, limestone, caliche, and compacted applications, among others. it comes with a carbide bullet that spins to fracture hard materials, breaking apart solid surfaces. When trenching in less dirt, this chain is preferable since it has no cup teeth to clean the trench. It’s not recommended a deep solid application.