Cup Teeth
Bullet Bit Holders
Carbide Bullet Bits
Repair Parts For Carbide Cutters
Drive Sprockets
Roller & Auger Sprocket
Chain Repair Parts
BARE CHAIN & DIGGING CHAIN ASSEMBLIES
4 PITCH SPACING –STANDARD CUP TOOTH CHAIN 6″ CUT
Standard trencher chain with 50% cut teeth, ideal for the easiest digging conditions like sand, sandy loam, loose shale, loose soil, and sticky clay.
2″ PITCH DOUBLE STANDARD BARE CHAIN
2.0″ Anti-Back Flex bare trencher chain. Meets or Exceeds OEM specification.
2″ PITCH DOUBLE STANDARD CUP TOOTH CHAIN 6″ CUT
2.0″ Anti-back flex trencher chain, perfect for trenching in sand, sandy loam, loose shale, loose soil, caliche, and clay.
2″ PITCH 50/50 COMBO CHAIN 6″ CUT
(CARBIDE TIPPED BULLET BITS & CUP TOOTH)
THIS 50/50 CHAIN COMBO allows for trenching in almost any type of ground. The carbide tipped replaceable BULLET BITS are bolted to the chain and used to break up the ground. The cup teeth follow to clean the trench. Use on LOOSE DIRT, MEDIUM, AND HARD ROCKY SOIL.
2″ PITCH 50/50 COMBO CHAIN 6″ CUT
(CARBIDE TIPPED SHARK TEETH & CUP TOOTH)
THIS 50/50 CHAIN COMBO allows for trenching in almost any type of ground. The non-replaceable Shark Tooth will OUTLAST THE CHAIN. The cup teeth follow the Shark Tooth to clean the trench. Use on LOOSE DIRT, MEDIUM, AND HARD ROCKY SOIL.
2″ PITCH DOUBLE STANDARD SHARK TOOTH WELDED CHAIN 6″ CUT
THE WELDED SHARK TOOTH CHAIN is a MAINTENANCE FREE low profile chain assembly. The carbide tipped shark tooth will OUTLAST THE CHAIN. Tension Adjustment is the only maintenance required. A great chain for digging HARD ROCK, CALICHE, CORAL, AND LIMESTONE.
2″ PITCH ALL ROCK & FROST CHAIN 6″ CUT
(CARBIDE TIPPED BULLET BITS)
THE BOLT ON ROCK AND FROST CHAINS are used on HARD ROCKY CONDITIONS AND ROCKY GROUND. This chain uses replaceable carbide tipped BULLET BITS to pick and fracture hard rock and frozen ground.
2″ PITCH ALL BULLET H-PLATE CHAIN 6″ CUT
DO YOU NEED A CHAIN FOR THE MOST EXTREME CONDITIONS? Use this chain in HARD ROCKY CONDITIONS, FROZEN GROUND, ASPHALT, AND CONCRETE. The welded H-plate chain gives you the best bit penetration angle plus great trench clean out. This assembly has HEAVY-DUTY, HEAT-TREATED POCKETS AND ROCK BITS WITH PROTECTORS.